INTERVENTIONS

products search

Waterproofing Restoring concrete Exterior Insulation and Finish System Masonry Foundation floor design Printed concrete Floor for driveway use Terraces and balconies Cement design coatings Restoring a pillar Furniture in concrete Indoor walls Floor tiles Bonding tiles on wall Restoring Outdoor walls Indoor floor Printed plaster Thermal insulation Restauration eco historique

35 products for Cement design coatings furniture, decoration and finishings with high aesthetic value.



pietra liquida SPE07

Multi-purpose latex ready-for-use, ideal for increasing adhesion, abrasion resistance, water resistance; can be used instead of mixing water in the ranges NANOSTUCCO







nanostucco base NAN58

Hybrid skim coat for the preparation and regularisation of substrates, with very high performance and very high adhesion, specifically formulated as a base coat for textured finishes, also suitable for waterproofing with NANOSTUCCO 3D-MULTIFOIL.







nanostucco 200 NAN02

Two-component, spatulable, colored coating. Highly hydrophobic, with very high adhesion and elasticity, suitable for any kind of substrate, such as metal, ceramic, cement, MDF, etc., for walls, floors and furniture, for the production of textured finishes. Available in different grain sizes and textures, based on cement, very fine-grained spherical quartz, resins and additives.







neokera h 500 NEO13

Sprinkled hardener with hardening surface function for coloring and finishing of stamped concrete, very high surface resistance, based on quartz, cement, resins and additives, with wetting function.







nanostucco preclean SHI10

Acid detergent, without harmful fumes, for the preparation of substrates encrusted with cement, lime, hydraulic lime, plaster and mortar in general. Also useful for the removal of efflorescence.







neokera skin NEO06

Monolayer mortar, ideal for the construction of monolithic floors with stamped texture in situ. Low thick, even in overlay on existing concrete, based on cement, selected quartz sands and additives.







nanostucco 500 NAN29

One-component, spatulable, colored coating. Hydrophobic, with excellent adhesion and high surface hardness and abrasion resistance, for walls, floors and furniture, for the production of textured finishes, available in different grain sizes and textures, based on cement, fine-grained spherical quartz, resins and additives.







nanostucco 3d-multifoil SHI13

High-performance, 3-layer desolidarising membrane with non-woven fabric, polyethylene membrane with a marked 3D shock-absorbing profile and polypropylene surface suitably fibreglassed for improved adhesion. Specific for waterproofing even overlapping on balconies, terraces and horizontal surfaces.







speciali emulsionmix SPE05

Multi-purpose synthetic resin to improve adhesion, elasticity and water resistance in cement based mortars







nanostucco 500 endcoat NAN45

One-component, finishing ultrafine colored grout, based on hydraulic binders and resins. Essential to get finishings of NANOSTUCCO SMOOTH type. NANOSTUCCO 500 ENDCOAT, if applied at the end of the cycle, helps to increase the abrasion resistance of the material and to make the surface smooth.







neokera intonaco 200 NEO09

Monolayer fiber-reinforced waterproof mortar for stamped plaster walls, with excellent performance, based on cement, selected silica sands and additives, class CR CSIV W2.







nanostucco band SHI14

Waterproof polyethylene tape with a non-woven polypropylene fabric on both sides. Designed to ensure continuity between the joints of the rolls of NANOSTUCCO 3D-MULTIFOIL. Specific for use with NANOSTUCCO JOINT.







nanostucco 800 NAN30

One-component, spatulable, colored coating. Highly hydrophobic, oil repellent and stain resistant, with excellent adhesion and high surface hardness and abrasion resistance, for walls, floors and furniture. Ideal to create matt surfaces. Does not require protection with resin, for textured finishes, available in different grain sizes and textures, based on cement, very fine-grained spherical quartz, resins and additives.







neokera intonaco 500 NEO12

Monolayer plaster with very high performance and extremely high adhesion power, fiber-reinforced, waterproofed, for stamped plaster walls, ideal for the construction of textures with very deep molds, up to 7 cm, artificial rocks, finishes with presence of waterworks, pools, etc. Based on cement, selected silica sands and additives, class CR CSIV W2.







nanostucco primer SHI07

Special acrylic impregnating agent, based on resins, anti-foaming and stress relieving additives, specifically for use as a neutralizing primer, before polyurethane sealers on mineral substrates. Available in glossy or matte version







pavimix ff 200 PAV10

Self-leveling colored mortar for flooring. High adherence, low elastic modulus, wear resistant, high workability, based on cement and special hydraulic binders, class CT C30 F7 A6.







nanostucco 800 endcoat NAN46

One-component, finishing ultrafine colored grout, based on hydraulic binders and resins with stain proof treatment ingrained. Essential to get finishings of NANOSTUCCO SMOOTH type. NANOSTUCCO ENDCOAT 800 if applied at the end of the cycle, helps to increase the abrasion resistance of the material and to make the surface smooth.







neokera intonaco ecocalix NEO11

Monolayer fiber-reinforced plaster, based on natural hydraulic lime, for finishing stamped concrete at walls with high performance, ideal for historical restoration and production of breathable finishes, based on natural hydraulic lime, selected silica sands and additives, class CR CSIV W2.







pavimix scm PAV15

Self-compacting colored cementitious mortar. Ready to use, for cement furniture, with high performance, wear-resistant. Ideal for construction of high quality cement products.







nanostucco shield 01A lucido SHI06

Two-component, water-based, aliphatic polyurethane resin to be applied by roller to give high protection and washability to surfaces, to be catalysed at 2% with NANOSTUCCO SHIELD C. For walls and floors. Ideal for the protection of NANOSTUCCO and PAVIMIX textured finishes. Glossy appearance.







nanostucco joint NAN59

One-component waterproofing and elastic adhesive specifically designed for gluing NANOSTUCCO BAND based on additive resins and pure quartz. Specific to give continuity to the waterproofings that use waterproofing fabrics such as NANOSTUCCO 3D-MULTIFOIL.







isolplano drain PLA09

Two-component, powder + gravel mortar, for the production of draining colored concrete, with high performance, accelerate drying and setting, high draining effect, ideal for construction of parking lots, squares, sidewalks, suitable for vehicles, based on hydraulic cementitious binders, selected aggregates and additives.







nanostucco shield 05A satinato SHI05

Two-component, water-based, aliphatic polyurethane resin to be applied by roller to give high protection and washability to surfaces, to be catalysed at 2% with NANOSTUCCO SHIELD C. For walls and floors. Ideal for the protection of NANOSTUCCO and PAVIMIX textured finishes. Satin appearance.







nanostucco 700 ceramic NAN60

One-component powder coating with ceramicising action. For finishes with a material effect, whether they are floors, walls, furniture, sanitary fixtures etc. are of high aesthetic value. With very high mechanical performances. Easy to lay.







nanostucco metal MET01

One-component spatulable coating in pure metal. For surfaces with a brilliant, material appearance, such as a shaped metal sheet.







nanostucco shield 07A matte SHI17

Two-component, water-based, aliphatic polyurethane resin to be applied by roller to give high protection and washability to surfaces, to be catalysed at 2% with NANOSTUCCO SHIELD C. For walls and floors. Ideal for the protection of NANOSTUCCO and PAVIMIX textured finishes. Ultra-matte appearance.







nanostucco carbon shield SHI04

Water-based concentrated fluorocarbon impregnating agent, invisible, stain-resistant, to be applied by brush or roller, with a high oil-hydro-repellency. Based on reactive silane-modified fluorocarbon resins.







nanostucco carbonwax SHI08

Protective, fluocarbonic, water-based oil-hydro-repellent wax, with a natural effect, to be used for the finishing and maintenance of surfaces made with NANOSTUCCO and treated with the protective agents of the NANOSTUCCO SHIELD range.







nanostucco grip SHI12

Invisible water-repellent impregnating agent, specifically designed for non-slip treatment in the presence of water on surfaces such as NANOSTUCCO, PAVIMIX, etc. at the end of the cycle.







nanostucco protect and clean SHI11

Specific detergent, ready to dilute with water for cleaning surfaces covered with polyurethane resins with restructuring action for surfaces covered with NANOSTUCCO SHIELD. It has an excellent wetting power. It evaporates quickly without leaving marks.







isolmix mare color ISO09

Water-repellent, breathable, coloured finishing plaster, for any kind of building, durable in areas subject to saltpeter, for buildings near the sea, based on hydraulic binders, resins and chemical additives with superpozzolanic effect, class CR CSIV W2.







nanostucco rag SHI15

Antistatic cloth with three-dimensional surface microtexture, it has a very strong power to capture and remove the microparticles generated by sanding NANOSTUCCO METAL.







isolmix acsiposi ISO23

Acrylic-calcium silicate-superpozzolanic-siloxanic finishing plaster, water-repellent, breathable, resistant to saline (saltpeter), unalterable, coloured, based on selected silica sand, hydraulic binders, resins and additives, class CR CSIV W2.







nanostucco smartpolish SHI16

Series of 6 soft abrasive discs, with 100% of the structure completely open to the passage of sucked air, with specific grits for sanding and mirror polishing of surfaces made with NANOSTUCCO METAL. It does not leave burns, it does not generate furrows, it does not let the sanded powders get mixed.







nanostucco metal shield SHI18

Protective and revitalizing wax for the finishing of NANOSTUCCO METAL at the end of the polishing cycle. It protects the metal from oxidation.