products search


15 products for DESIGN AND SHIELD



pietra liquida SPE07

Multi-purpose latex ready-for-use, ideal for increasing adhesion, abrasion resistance, water resistance; can be used instead of mixing water in the ranges NANOSTUCCO







nanostucco preclean SHI10

Acid detergent, without harmful fumes, for the preparation of substrates encrusted with cement, lime, hydraulic lime, plaster and mortar in general. Also useful for the removal of efflorescence.







nanostucco 3d-multifoil SHI13

High-performance, 3-layer desolidarising membrane with non-woven fabric, polyethylene membrane with a marked 3D shock-absorbing profile and polypropylene surface suitably fibreglassed for improved adhesion. Specific for waterproofing even overlapping on balconies, terraces and horizontal surfaces.







nanostucco band SHI14

Waterproof polyethylene tape with a non-woven polypropylene fabric on both sides. Designed to ensure continuity between the joints of the rolls of NANOSTUCCO 3D-MULTIFOIL. Specific for use with NANOSTUCCO JOINT.







nanostucco primer SHI07

Special acrylic impregnating agent, based on resins, anti-foaming and stress relieving additives, specifically for use as a neutralizing primer, before polyurethane sealers on mineral substrates. Available in glossy or matte version







nanostucco shield 01A lucido SHI06

Two-component, water-based, aliphatic polyurethane resin to be applied by roller to give high protection and washability to surfaces, to be catalysed at 2% with NANOSTUCCO SHIELD C. For walls and floors. Ideal for the protection of NANOSTUCCO and PAVIMIX textured finishes. Glossy appearance.







nanostucco shield 05A satinato SHI05

Two-component, water-based, aliphatic polyurethane resin to be applied by roller to give high protection and washability to surfaces, to be catalysed at 2% with NANOSTUCCO SHIELD C. For walls and floors. Ideal for the protection of NANOSTUCCO and PAVIMIX textured finishes. Satin appearance.







nanostucco shield 07A matte SHI17

Two-component, water-based, aliphatic polyurethane resin to be applied by roller to give high protection and washability to surfaces, to be catalysed at 2% with NANOSTUCCO SHIELD C. For walls and floors. Ideal for the protection of NANOSTUCCO and PAVIMIX textured finishes. Ultra-matte appearance.







nanostucco carbon shield SHI04

Water-based concentrated fluorocarbon impregnating agent, invisible, stain-resistant, to be applied by brush or roller, with a high oil-hydro-repellency. Based on reactive silane-modified fluorocarbon resins.







nanostucco carbonwax SHI08

Protective, fluocarbonic, water-based oil-hydro-repellent wax, with a natural effect, to be used for the finishing and maintenance of surfaces made with NANOSTUCCO and treated with the protective agents of the NANOSTUCCO SHIELD range.







nanostucco grip SHI12

Invisible water-repellent impregnating agent, specifically designed for non-slip treatment in the presence of water on surfaces such as NANOSTUCCO, PAVIMIX, etc. at the end of the cycle.







nanostucco protect and clean SHI11

Specific detergent, ready to dilute with water for cleaning surfaces covered with polyurethane resins with restructuring action for surfaces covered with NANOSTUCCO SHIELD. It has an excellent wetting power. It evaporates quickly without leaving marks.







nanostucco rag SHI15

Antistatic cloth with three-dimensional surface microtexture, it has a very strong power to capture and remove the microparticles generated by sanding NANOSTUCCO METAL.







nanostucco smartpolish SHI16

Series of 6 soft abrasive discs, with 100% of the structure completely open to the passage of sucked air, with specific grits for sanding and mirror polishing of surfaces made with NANOSTUCCO METAL. It does not leave burns, it does not generate furrows, it does not let the sanded powders get mixed.







nanostucco metal shield SHI18

Protective and revitalizing wax for the finishing of NANOSTUCCO METAL at the end of the polishing cycle. It protects the metal from oxidation.